PartsTable
Technical Data Sheet
Download PDF

99067 — NUT,PLAIN,ROUND

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

99067: NUT,PLAIN,ROUND.

The NUT,PLAIN,ROUND is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_diameter: 0.860 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN, thread_class: 2B, nut_thickness: 0.048 INCHES NOMINAL IN, thread_series: UNF, hardness_rating: 42.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-442-6244, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99067
NSN: 5310-00-442-6244
FSC: 5310 — Nuts and Washers
CAGE: 62983 — EATON AEROSPACE, LLC DBA JACKSON SOUTH (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_diameter0.860 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
thread_class2B
nut_thickness0.048 INCHES NOMINAL IN
thread_seriesUNF
hardness_rating42.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
nominal_thread_size0.190 INCHES IN
thread_quantity_per_inch32
NSN5310-00-442-6244
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 99067 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
HARDNESS RATING: 42.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES IN
•
NUT DIAMETER: 0.860 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
•
NUT THICKNESS: 0.048 INCHES NOMINAL IN
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 32
TECHNICAL CHARACTERISTICS
THREAD SERIESUNF
HARDNESS RATING42.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
NUT DIAMETER0.860 INCHES MINIMUM AND 0.870 INCHES MAXIMUM IN
NUT THICKNESS0.048 INCHES NOMINAL IN
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
10391763Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 99067?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99067?
99067 is a NUT,PLAIN,ROUND.
What parts can replace 99067?
There is 1 known substitute for 99067: 10391763. Substitute compatibility should be verified for your specific system.
What is the NSN for 99067?
99067 is cataloged in the U.S. Government catalog under NSN 5310-00-442-6244. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99067