The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, length: 0.516 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN, material: STEEL COMP 1075 OVERALL, hole_diameter: 0.098 INCHES NOMINAL IN, overall_height: 0.595 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-01-243-0010, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
99054363
NSN:5340-01-243-0010 FSC:5340 — Hardware, Commercial CAGE:F6481 — THALES SA (FRA)
SPECIFICATIONS
width
1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
length
0.516 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
material
STEEL COMP 1075 OVERALL
hole_diameter
0.098 INCHES NOMINAL IN
overall_height
0.595 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
mounting_method
UNTHREADED HOLE(S)
surface_treatment
CADMIUM AND CHROMATE OVERALL
material_thickness
0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
loop/holding_dimension
0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
distance_from_loop_center_to_end
0.359 INCHES NOMINAL IN
material_document_and_classification
QQ-S-777 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classification
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN
5340-01-243-0010
COMPONENT DIAGRAM
KEY FEATURES
•
LENGTH: 0.516 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-777 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
•
DISTANCE FROM LOOP CENTER TO END: 0.359 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT
0.595 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
LENGTH
0.516 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHOD
UNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-S-777 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION
0.495 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
MATERIAL THICKNESS
0.011 INCHES MINIMUM AND 0.014 INCHES MAXIMUM IN
DISTANCE FROM LOOP CENTER TO END
0.359 INCHES NOMINAL IN
SURFACE TREATMENT
CADMIUM AND CHROMATE OVERALL
WIDTH
1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99054363?
99054363 is a CLIP,SPRING TENSION.
What parts can replace 99054363?
There is 1 known substitute for 99054363: 6014-13A. Substitute compatibility should be verified for your specific system.
What is the NSN for 99054363?
99054363 is cataloged in the U.S. Government catalog under NSN 5340-01-243-0010. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.