PartsTable
Technical Data Sheet
Download PDF

9904104455 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9904104455: O-RING.

The O-RING is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 5331-00-251-8839, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9904104455
NSN: 5331-00-251-8839
NIINs: 002518839, 014770804
FSC: 5331 — O-ring
CAGE: K4365 — MANITOWOC CRANE GROUP (UK) LIMITED (GBR)
SPECIFICATIONS
end_item_identificationDIRECT VENDOR DELIVERY (DVD), ATEC AT422-T, NSN: 3810-01-448-2619, CAGE 12361, PART NUMBER 1-140-0-00513, TM5-3810-307-24P, CONTRACT DAAE07-97-D-X001
NSN5331-00-251-8839
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9904104455 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5510 MIL SPEC SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.139 INCHES MINIMUM AND 1.173 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5510 MIL SPEC SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE; ARMORED MULTI-PURPOSE VEHICLE (AMPV).
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 10
5-131-04-024-00Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AMS-P-5510Reference document
Same NSN cross-reference
Reference document — Secondary reference
0921206-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS28778-12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
B400PCAN6290-12Reference document
Same NSN cross-reference
Reference document — Secondary reference
4955500114Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 9904104455?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9904104455?
9904104455 is a O-RING.
What parts can replace 9904104455?
There are 10 known substitutes for 9904104455: 5-131-04-024-00, AMS-P-5510, 0921206-9 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9904104455?
9904104455 is cataloged in the U.S. Government catalog under NSN 5331-00-251-8839. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9904104455

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.