PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 99036-60
99036-60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, outside_diameter: 1.251 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.992 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN, cross-sectional_thickness: 0.250 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-074-8869, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99036-60
NSN: 5330-00-074-8869
FSC: 5330
CAGE: 02280 — AMERICAN HOIST AND DERRICK CO
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
outside_diameter1.251 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.992 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN
cross-sectional_thickness0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-074-8869
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 99036-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 0.992 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
OUTSIDE DIAMETER: 1.251 INCHES NOMINAL IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER0.992 INCHES MINIMUM AND 0.997 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
OUTSIDE DIAMETER1.251 INCHES NOMINAL IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
104500Interchangeable
interchangeable cross-reference
interchangeable
AQU4/AInterchangeable
interchangeable cross-reference
interchangeable
MIL-I-27848Interchangeable
interchangeable cross-reference
interchangeable
101000Interchangeable
interchangeable cross-reference
interchangeable
050519 ITEM 21Interchangeable
interchangeable cross-reference
interchangeable
11045001440317Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 99036-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99036-60?
99036-60 is a GASKET.
What parts can replace 99036-60?
There are 11 known substitutes for 99036-60: 104500, AQU4/A, MIL-I-27848 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 99036-60?
99036-60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-074-8869. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99036-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026