PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 99036-57
99036-57 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, construction: ONE-PIECE, outside_diameter: 1.652 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN, retainer_thickness: 0.087 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN, packing_inside_diameter: 1.050 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-253-3335, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99036-57
NSN: 5330-00-253-3335
FSC: 5330
CAGE: 02280 — AMERICAN HOIST AND DERRICK CO
SPECIFICATIONS
materialSTEEL RETAINER
constructionONE-PIECE
outside_diameter1.652 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN
retainer_thickness0.087 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
packing_inside_diameter1.050 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN
NSN5330-00-253-3335
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 99036-57 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PACKING INSIDE DIAMETER: 1.050 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC PACKING
•
RETAINER THICKNESS: 0.087 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
•
CONSTRUCTION: ONE-PIECE
•
OUTSIDE DIAMETER: 1.652 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PACKING INSIDE DIAMETER1.050 INCHES MINIMUM AND 1.055 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC PACKING
MATERIALSTEEL RETAINER
RETAINER THICKNESS0.087 INCHES MINIMUM AND 0.092 INCHES MAXIMUM IN
CONSTRUCTIONONE-PIECE
OUTSIDE DIAMETER1.652 INCHES MINIMUM AND 1.660 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
49064PC1322Interchangeable
interchangeable cross-reference
interchangeable
179819Interchangeable
interchangeable cross-reference
interchangeable
123SEAV10490-279Interchangeable
interchangeable cross-reference
interchangeable
106326Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 99036-57?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99036-57?
99036-57 is a PACKING WITH RETAINER.
What parts can replace 99036-57?
There are 4 known substitutes for 99036-57: 49064PC1322, 179819, 123SEAV10490-279 and 1 more. Substitute compatibility should be verified for your specific system.
Is 99036-57 still available?
99036-57 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99036-57

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026