PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 99-7587-002

99-7587-002 — Technical Data Sheet

✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, nut_style: CLINCH, nut_height: 0.226 INCHES NOMINAL IN, temp_rating: 800.0 FAHRENHEIT NOMINAL DEGF, nut_diameter: 0.359 INCHES NOMINAL IN, pilot_length: 0.054 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-071-0199, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99-7587-002
NSN: 5310-00-071-0199
FSC: 5310
CAGE: 55180 — ALLIANT DEFENSE ELECTRONICS SYSTEMS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
nut_styleCLINCH
nut_height0.226 INCHES NOMINAL IN
temp_rating800.0 FAHRENHEIT NOMINAL DEGF
nut_diameter0.359 INCHES NOMINAL IN
pilot_length0.054 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.289 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
features_providedFLOATING NUT
NSN5310-00-071-0199
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 99-7587-002 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.226 INCHES NOMINAL IN
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
TEMP RATING: 800.0 FAHRENHEIT NOMINAL DEGF
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL: STEEL COMP 303 OVERALL
•
THREAD CLASS: 3B
•
PILOT LENGTH: 0.054 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.226 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.112 INCHES IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TEMP RATING800.0 FAHRENHEIT NOMINAL DEGF
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIALSTEEL COMP 303 OVERALL
THREAD CLASS3B
PILOT LENGTH0.054 INCHES MAXIMUM IN
PILOT DIAMETER0.289 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH40
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
F600F00460Interchangeable
interchangeable cross-reference
interchangeable
F600F460Interchangeable
interchangeable cross-reference
interchangeable
F143F401Interchangeable
interchangeable cross-reference
interchangeable
101366Interchangeable
interchangeable cross-reference
interchangeable
717801230-001Interchangeable
interchangeable cross-reference
interchangeable
019403-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 99-7587-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99-7587-002?
99-7587-002 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 99-7587-002?
There are 16 known substitutes for 99-7587-002: F600F00460, F600F460, F143F401 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 99-7587-002?
99-7587-002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-071-0199. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99-7587-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: August 2026