PartsTable
Technical Data Sheet
Download PDF

99-38-1 — Verbatim 99381 toner cartridge 1 pc(s) Black

✓ Government record, cited
Verbatim · MRO · MRO_GENERAL
PRODUCT OVERVIEW

99-38-1: Verbatim 99381 toner cartridge 1 pc(s) Black.

Verbatim offers an extensive range of monochrome (black) laser cartridges. Every cartridge is manufactured to the highest standards, print-tested prior to packaging, and performance is benchmarked against the OEM, guaranteeing quality and consistency, page after page.Every Verbatim laser cartridge is backed by a Limited Lifetime Warranty. And, if one of our cartridges damages your printer, we will reimburse you for the cost of the repair.

This part is cataloged in the U.S. Government catalog under NSN 5955-00-004-2037, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 99-38-1
NSN: 5955-00-004-2037
NIINs: 000042037, 009799179, 010694832, 011312565, 016821950
FSC: 5955 — Oscillators and Piezoelectric Crystals
CAGE: 00136 — MICROSEMI CORP. - HIGH PERFORMANCE TIMING DBA VECTRON INTERNATIONAL- CANCELLED (USA)
SPECIFICATIONS
special_features3 WIRES ATTACHED, WHITE, GREEN, BLACK
end_item_identification2320-01-560-4409
part_name_assigned_by_controlling_agencyRECEPTACLE, HAND HELD
NSN5955-00-004-2037
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: Verbatim Verbatim 99381 toner cartridge 1 pc(s) Black TITLE COMPONENT PN 99-38-1 MFR Verbatim Verbatim 99381 toner c
KEY FEATURES
•
CONTROLLED REFERENCE TEMP: 65.0 CELSIUS DEGC
•
OPERABLE TEMP RANGE: -25.0 TO 75.0 CELSIUS DEGC
•
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT: -0.0005 TO 0.0005
•
TERMINAL DIAMETER: 0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
TERMINAL LENGTH: 0.980 INCHES MINIMUM AND 1.105 INCHES MAXIMUM IN
•
MODE OF OSCILLATION: FIFTH OVERTONE
•
EQUIVALENT RESISTANCE VALUE IN OHMS: 40.0 NOMINAL
TECHNICAL CHARACTERISTICS
CONTROLLED REFERENCE TEMP65.0 CELSIUS DEGC
OPERABLE TEMP RANGE-25.0 TO 75.0 CELSIUS DEGC
FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT-0.0005 TO 0.0005
TERMINAL DIAMETER0.016 INCHES MINIMUM AND 0.019 INCHES MAXIMUM IN
OVERALL DIAMETER0.340 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
TERMINAL LENGTH0.980 INCHES MINIMUM AND 1.105 INCHES MAXIMUM IN
MODE OF OSCILLATIONFIFTH OVERTONE
EQUIVALENT RESISTANCE VALUE IN OHMS40.0 NOMINAL
STYLE DESIGNATORHAT TYPE, 3 WIRE LEADS
DIAMETER0.310 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
K311-1Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)Demilitarization required — critical (Q)
Ready to buy 99-38-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99-38-1?
99-38-1 is a Verbatim 99381 toner cartridge 1 pc(s) Black manufactured by Verbatim. It is classified as a MRO (MRO_GENERAL).
What parts can replace 99-38-1?
There is 1 known substitute for 99-38-1: K311-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 99-38-1?
99-38-1 is cataloged in the U.S. Government catalog under NSN 5955-00-004-2037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99-38-1