PartsTable
Technical Data Sheet
99-0726 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The NETWORK,PULSE FORMING is a the manufacturer industrial component. Key specifications include special_features: ELECTRODE, ELECTROSURGICAL UNIT, 1 IN. STRAIGHT BLADE IN, end_item_identification: FOR USE WITH ELECTROSURGICAL UNIT, FORCE 2, NSN 6515-01-309-6647, part_name_assigned_by_controlling_agency: ELECTRODE ELECTROSURGICAL.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-344-8265, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
99-0726
NSN: 5330-01-344-8265
FSC: 5330
CAGE: 0P9L0 — MACROTECH/SELASTOMER (USA)
SPECIFICATIONS
special_featuresELECTRODE, ELECTROSURGICAL UNIT, 1 IN. STRAIGHT BLADE IN
end_item_identificationFOR USE WITH ELECTROSURGICAL UNIT, FORCE 2, NSN 6515-01-309-6647
part_name_assigned_by_controlling_agencyELECTRODE ELECTROSURGICAL
NSN5330-01-344-8265
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 99-0726 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 INSERT
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES INSERT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1012 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 INSERT
OVERALL WIDTH0.525 INCHES MINIMUM AND 0.540 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES INSERT
OVERALL LENGTH3.945 INCHES MINIMUM AND 3.985 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
99-0726Interchangeable
interchangeable cross-reference
interchangeable
E1020Interchangeable
interchangeable cross-reference
interchangeable
M/ABIS0007Interchangeable
interchangeable cross-reference
interchangeable
10889726Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 99-0726?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 99-0726?
99-0726 is a NETWORK,PULSE FORMING.
What parts can replace 99-0726?
There are 4 known substitutes for 99-0726: 99-0726, E1020, M/ABIS0007 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 99-0726?
99-0726 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-344-8265. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 99-0726