PartsTable
Technical Data Sheet
Download PDF

9879 — TUBE,DRAINAGE,SURGICAL

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

9879: TUBE,DRAINAGE,SURGICAL.

The TUBE,DRAINAGE,SURGICAL is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, tip_type: TEE, nominal_diameter: 8.000 FRENCH, special_features: 3/64 IN. LUMEN; 5 IN.

CROSSBAR; 12 IN. STEM; FLEXIBLE; FOR FIBROUS TRACT DEVELOPMENT/WOUND TRAUMA; UNIT QTY 10 IN, style_designator: DRAINAGE TUBING, design_designation: DEAVER. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-262-5481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9879
NSN: 5310-00-262-5481
NIINs: 002625481, 004354213, 010229146, 012351877, 012738625
FSC: 5310 — Nuts and Washers
CAGE: 63117 — SICARD A DIVISION OF SMI-SNOWBLAST INC DBA SICARD (USA)
SPECIFICATIONS
materialRUBBER OVERALL
tip_typeTEE
nominal_diameter8.000 FRENCH
special_features3/64 IN. LUMEN; 5 IN. CROSSBAR; 12 IN. STEM; FLEXIBLE; FOR FIBROUS TRACT DEVELOPMENT/WOUND TRAUMA; UNIT QTY 10 IN
style_designatorDRAINAGE TUBING
design_designationDEAVER
end_item_identificationHEMTT FAMILY (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
part_name_assigned_by_controlling_agencyTUBE DRAINAGE SURG DEAVER E3 8 FR RUBBER 3/64" LUMEN 12" STEM 10S
NSN5310-00-262-5481
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9879 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL STRAIGHT KEY WIDTH: 0.474 INCHES MINIMUM AND 0.474 INCHES MINIMUM AND 0.494 INCHES MAXIMUM0.494 INCHES MAXIMUM IN
•
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY: 0.865 INCHES MINIMUM AND 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM0.885 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: KEYKEY
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALLSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 3.240 INCHES MINIMUM AND 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM3.260 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.052 INCHES MINIMUM AND 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM0.072 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 1010 OVERALL
•
INTERNAL KEY QUANTITY: 11
TECHNICAL CHARACTERISTICS
INTERNAL STRAIGHT KEY WIDTH0.474 INCHES MINIMUM AND 0.474 INCHES MINIMUM AND 0.494 INCHES MAXIMUM0.494 INCHES MAXIMUM IN
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY0.865 INCHES MINIMUM AND 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM0.885 INCHES MAXIMUM IN
STYLE DESIGNATORKEYKEY
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALLSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER3.240 INCHES MINIMUM AND 3.240 INCHES MINIMUM AND 3.260 INCHES MAXIMUM3.260 INCHES MAXIMUM IN
MATERIAL THICKNESS0.052 INCHES MINIMUM AND 0.052 INCHES MINIMUM AND 0.072 INCHES MAXIMUM0.072 INCHES MAXIMUM IN
MATERIALSTEEL COMP 1010 OVERALL
INTERNAL KEY QUANTITY11
HOLE DIAMETER2.131 INCHES MINIMUM AND 2.131 INCHES MINIMUM AND 2.151 INCHES MAXIMUM2.151 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
1229X700Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
667351Reference document
Same NSN cross-reference
Reference document — Secondary reference
01209879Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
057148Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
326949Reference document
Same NSN cross-reference
Reference document — Secondary reference
38342Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9879?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9879?
9879 is a TUBE,DRAINAGE,SURGICAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9879?
There are 6 known substitutes for 9879: 1229X700, 667351, 01209879 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9879?
9879 is cataloged in the U.S. Government catalog under NSN 5310-00-262-5481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9879

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.