PartsTable
Technical Data Sheet
Download PDF

98694R1 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

98694R1: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN, recess_diameter: 2.828 INCHES NOMINAL IN, outside_diameter: 4.115 INCHES MINIMUM AND 4.135 INCHES MAXIMUM IN, style_designator: RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-033-6012, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
98694R1
NSN: 5310-00-033-6012
FSC: 5310 — Nuts and Washers
CAGE: 89346 — NAVISTAR INTL CORP TRUCK BR OHIO PLANT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
recess_diameter2.828 INCHES NOMINAL IN
outside_diameter4.115 INCHES MINIMUM AND 4.135 INCHES MAXIMUM IN
style_designatorRECESSED
material_thickness0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
NSN5310-00-033-6012
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 98694R1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECESSED
•
OUTSIDE DIAMETER: 4.115 INCHES MINIMUM AND 4.135 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
RECESS DIAMETER: 2.828 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
•
RECESS ANGLE: 90.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECESSED
OUTSIDE DIAMETER4.115 INCHES MINIMUM AND 4.135 INCHES MAXIMUM IN
MATERIAL THICKNESS0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
RECESS DIAMETER2.828 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
HOLE DIAMETER2.505 INCHES MINIMUM AND 2.510 INCHES MAXIMUM IN
RECESS ANGLE90.0 DEGREES NOMINAL
SUBSTITUTES & CROSS-REFERENCES 2
5310000336012Reference document
Same NSN cross-reference
Reference document — Informative reference only
314279Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 98694R1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 98694R1?
98694R1 is a WASHER,RECESSED.
What parts can replace 98694R1?
There are 2 known substitutes for 98694R1: 5310000336012, 314279. Substitute compatibility should be verified for your specific system.
What is the NSN for 98694R1?
98694R1 is cataloged in the U.S. Government catalog under NSN 5310-00-033-6012. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 98694R1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.