985 ITEM 17 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

985 ITEM 17: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.749 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN, center_hole_diameter: 0.479 INCHES MINIMUM AND 0.489 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-451-9557, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

985 ITEM 17

NSN: 5331-00-451-9557
FSC: 5331 — O-ring
CAGE: 53918 — SEPARATION & RECOVERY SYSTEMS INC (USA)

SPECIFICATIONS

material	RUBBER SYNTHETIC
temp_rating	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.749 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN
center_hole_diameter	0.479 INCHES MINIMUM AND 0.489 INCHES MAXIMUM IN
elongation_percentage	331 MAXIMUM
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN	5331-00-451-9557

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.749 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 331 MAXIMUM

•

CENTER HOLE DIAMETER: 0.479 INCHES MINIMUM AND 0.489 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SYNTHETIC

TECHNICAL CHARACTERISTICS

TEMP RATING	-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.749 INCHES MINIMUM AND 0.775 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	331 MAXIMUM
CENTER HOLE DIAMETER	0.479 INCHES MINIMUM AND 0.489 INCHES MAXIMUM IN
MATERIAL	RUBBER SYNTHETIC

SUBSTITUTES & CROSS-REFERENCES 7

352-1-32Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

172000254Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AS568-206MIL-G- 21569 CL 1Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

1998379 PIECE 3Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-206 N674-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

5331PL0794264Reference document

Same NSN cross-reference

Reference document — Informative reference only

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 985 ITEM 17?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 985 ITEM 17?

985 ITEM 17 is a O-RING.

What parts can replace 985 ITEM 17?

There are 7 known substitutes for 985 ITEM 17: 352-1-32, 172000254, AS568-206MIL-G- 21569 CL 1 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 985 ITEM 17?

985 ITEM 17 is cataloged in the U.S. Government catalog under NSN 5331-00-451-9557. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

985 ITEM 17 — O-RING

Request a Quote — 985 ITEM 17