PartsTable
Technical Data Sheet
Download PDF

9842406-14-8 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9842406-14-8: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1110 OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT COUNTERSUNK REVERSE KEYED, key_length: 0.063 INCHES MAXIMUM IN, nut_length: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN, head_height: 0.063 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-493-6079, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9842406-14-8
NSN: 5310-01-493-6079
FSC: 5310 — Nuts and Washers
CAGE: 98752 — WARNER ROBINS AIR LOGISTICS CENTER (USA)
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1110 OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT COUNTERSUNK REVERSE KEYED
key_length0.063 INCHES MAXIMUM IN
nut_length0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
head_height0.063 INCHES MAXIMUM IN
nut_diameter0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
thread_class3B
head_diameter0.355 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
shank_end_typeOPEN
thread_directionRIGHT-HAND
NSN5310-01-493-6079
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9842406-14-8 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.063 INCHES MAXIMUM IN
•
NUT LENGTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HEAD COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT COUNTERSUNK REVERSE KEYED
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.063 INCHES MAXIMUM IN
NUT LENGTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HEAD COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
SHANK END TYPEOPEN
HEAD STYLEFLAT COUNTERSUNK REVERSE KEYED
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.217 INCHES MINIMUM AND 0.221 INCHES MAXIMUM IN
KEY LENGTH0.063 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
S8K161ZFReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9842406-14-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9842406-14-8?
9842406-14-8 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 9842406-14-8?
There is 1 known substitute for 9842406-14-8: S8K161ZF. Substitute compatibility should be verified for your specific system.
What is the NSN for 9842406-14-8?
9842406-14-8 is cataloged in the U.S. Government catalog under NSN 5310-01-493-6079. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9842406-14-8