PartsTable
Technical Data Sheet
Download PDF

98355A200 — PIN,COTTER

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

98355A200: PIN,COTTER.

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.156 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING OVERALL, special_features: HATCH, FLWTQA, end_item_identification: WASP CLASS LHD, material_document_and_classification: FF-P-386,TYPEC2ABNAJAA1.750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-469-0406, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
98355A200
NSN: 5315-01-469-0406
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 3A054 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
diameter0.156 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING OVERALL
special_featuresHATCH, FLWTQA
end_item_identificationWASP CLASS LHD
material_document_and_classificationFF-P-386,TYPEC2ABNAJAA1.750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5315-01-469-0406
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 98355A200 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: FF-P-386,TYPEC2ABNAJAA1.750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
DIAMETER: 0.156 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONFF-P-386,TYPEC2ABNAJAA1.750 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.156 INCHES NOMINAL IN
SPECIAL FEATURESHATCH, FLWTQA
END ITEM IDENTIFICATIONWASP CLASS LHD
MATERIALSTEEL CORROSION RESISTING OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
167-6926166Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
803-5959183 PC 99Reference document
Same NSN cross-reference
Reference document — Secondary reference
167-6926166 PC 278Reference document
Same NSN cross-reference
Reference document — Secondary reference
803-5959183 PC9Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
803-5959183Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 98355A200?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 98355A200?
98355A200 is a PIN,COTTER.
What parts can replace 98355A200?
There are 5 known substitutes for 98355A200: 167-6926166, 803-5959183 PC 99, 167-6926166 PC 278 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 98355A200?
98355A200 is cataloged in the U.S. Government catalog under NSN 5315-01-469-0406. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 98355A200