Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM, material: PLASTIC TETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT RETAINER, peripheral_diameter: 2.993 INCHES MINIMUM AND 2.997 INCHES MAXIMUM IN, center_hole_diameter: 2.625 INCHES NOMINAL IN, distance_between_ends: 0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5330-00-171-5902, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
982209
NSN:5330-00-171-5902 FSC:5330 CAGE:F6137 — SAFRAN LANDING SYSTEMS (FRA)
SPECIFICATIONS
angle
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
material
PLASTIC TETRAFLUOROETHYLENE OVERALL
joint_type
SCARF-BUTT RETAINER
peripheral_diameter
2.993 INCHES MINIMUM AND 2.997 INCHES MAXIMUM IN
center_hole_diameter
2.625 INCHES NOMINAL IN
distance_between_ends
0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
cross-sectional_height
0.093 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
cross-sectional_thickness
0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
cross-sectional_shape_style
SQUARE
material_document_and_classification
SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN
5330-00-171-5902
COMPONENT DIAGRAM
KEY FEATURES
•
DISTANCE BETWEEN ENDS: 0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.625 INCHES NOMINAL IN
•
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.093 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
•
JOINT TYPE: SCARF-BUTT RETAINER
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
DISTANCE BETWEEN ENDS
0.062 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
CENTER HOLE DIAMETER
2.625 INCHES NOMINAL IN
ANGLE
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
CROSS-SECTIONAL HEIGHT
0.093 INCHES MINIMUM AND 0.108 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
SQUARE
CROSS-SECTIONAL THICKNESS
0.031 INCHES MINIMUM AND 0.036 INCHES MAXIMUM IN
JOINT TYPE
SCARF-BUTT RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION
SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 982209?
982209 is a RETAINER,PACKING.
What parts can replace 982209?
There are 19 known substitutes for 982209: 72-6970-505, 5207RH, 465507 and 16 more. Substitute compatibility should be verified for your specific system.
Is 982209 still available?
982209 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.