PartsTable
Technical Data Sheet
982198 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a the manufacturer industrial component. Key specifications include part_name_assigned_by_controlling_agency: TEST KIT LEGIONELLA DETERMINATION CAN PERFORM 96 TESTS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-171-7346, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
982198
NSN: 5330-00-171-7346
FSC: 5330
CAGE: F6137 — SAFRAN LANDING SYSTEMS (FRA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyTEST KIT LEGIONELLA DETERMINATION CAN PERFORM 96 TESTS
NSN5330-00-171-7346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 982198 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 1.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL DIAMETER: 1.678 INCHES MINIMUM AND 1.682 INCHES MAXIMUM IN
JOINT TYPE: SCARF-BUTT RETAINER
CROSS-SECTIONAL SHAPE STYLE: SQUARE
MATERIAL: PLASTIC TETRAFLUOROETHYLENE OVERALL
ANGLE: 25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
CROSS-SECTIONAL HEIGHT: 0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.438 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PERIPHERAL DIAMETER1.678 INCHES MINIMUM AND 1.682 INCHES MAXIMUM IN
JOINT TYPESCARF-BUTT RETAINER
CROSS-SECTIONAL SHAPE STYLESQUARE
MATERIALPLASTIC TETRAFLUOROETHYLENE OVERALL
ANGLE25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM
CROSS-SECTIONAL HEIGHT0.075 INCHES MINIMUM AND 0.087 INCHES MAXIMUM IN
CROSS-SECTIONAL THICKNESS0.025 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
DISTANCE BETWEEN ENDS0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
851-000Interchangeable
interchangeable cross-reference
interchangeable
98-2198Interchangeable
interchangeable cross-reference
interchangeable
5330PL1390900Interchangeable
Same NIIN cross-reference
interchangeable
5330PL1729894Interchangeable
Same NIIN cross-reference
interchangeable
255773PC108Interchangeable
Same NIIN cross-reference
interchangeable
MS28782Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 982198?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 982198?
982198 is a RESISTOR,FIXED,COMPOSITION.
What parts can replace 982198?
There are 9 known substitutes for 982198: 851-000, 98-2198, 5330PL1390900 and 6 more. Substitute compatibility should be verified for your specific system.
Is 982198 still available?
982198 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 982198