PartsTable
Technical Data Sheet
Download PDF

98005A130 — NUT,PLAIN,BLIND RIVET

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

98005A130: NUT,PLAIN,BLIND RIVET.

The NUT,PLAIN,BLIND RIVET is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: BLIND RIVET W/SMOOTH ROUND SHANK, head_style: FLAT, nut_length: 0.355 INCHES NOMINAL IN, head_height: 0.015 INCHES NOMINAL IN, nut_diameter: 0.249 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-616-0430, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
98005A130
NSN: 5310-01-616-0430
FSC: 5310 — Nuts and Washers
CAGE: 0KVE6 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleBLIND RIVET W/SMOOTH ROUND SHANK
head_styleFLAT
nut_length0.355 INCHES NOMINAL IN
head_height0.015 INCHES NOMINAL IN
nut_diameter0.249 INCHES NOMINAL IN
thread_class2B
head_diameter0.249 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
shank_end_typeOPEN
thread_directionRIGHT-HAND
surface_treatmentTIN OVERALL
NSN5310-01-616-0430
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 98005A130 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.015 INCHES NOMINAL IN
•
NUT LENGTH: 0.355 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: 18-8 STAINLESS STEEL MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
SHANK END TYPE: OPEN
•
HEAD STYLE: FLAT
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.164 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.015 INCHES NOMINAL IN
NUT LENGTH0.355 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATION18-8 STAINLESS STEEL MFR REF SINGLE MATERIAL RESPONSE OVERALL
SHANK END TYPEOPEN
HEAD STYLEFLAT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.164 INCHES IN
NUT DIAMETER0.249 INCHES NOMINAL IN
SURFACE TREATMENTTIN OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
08018B4188Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 98005A130?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 98005A130?
98005A130 is a NUT,PLAIN,BLIND RIVET.
What parts can replace 98005A130?
There is 1 known substitute for 98005A130: 08018B4188. Substitute compatibility should be verified for your specific system.
What is the NSN for 98005A130?
98005A130 is cataloged in the U.S. Government catalog under NSN 5310-01-616-0430. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 98005A130

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.