980021 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · TAPERED BEARING

PRODUCT OVERVIEW

980021: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL OVERALL, body_height: 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, bore_diameter: 0.4387 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN, overall_width: 0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN, alignment_type: RIGID, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-289-6762, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

980021

NSN: 3110-00-289-6762
NIINs: 002896762, 010649568
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 0AHU0 — KALMAR AC INC (USA)

SPECIFICATIONS

material	STEEL OVERALL
body_height	0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
bore_diameter	0.4387 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN
overall_width	0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
alignment_type	RIGID
surface_finish	GROUND
special_features	EXTRA CAPACITY OUTER RING
style_designator	NON-SEPARABLE, OPEN END, DRAWN SHELL
features_provided	HERMETICALLY SEALED AND EXTERNALLY COMPENSATED AND MONOLITHIC AND NEGATIVE OUTPUTS AND POSITIVE OUTPUTS
inclosure_material	GLASS AND METAL
storage_temp_range	-65.0 TO 150.0 CELSIUS DEGC
operating_temp_range	-55.0 TO 125.0 CELSIUS DEGC
NSN	3110-00-289-6762

COMPONENT DIAGRAM

KEY FEATURES

•

RETAINER FABRICATION METHOD: PRESSED

•

SURFACE FINISH: GROUND

•

STYLE DESIGNATOR: NON-SEPARABLE, OPEN END, DRAWN SHELL

•

OVERALL OUTSIDE DIAMETER: 0.6260 INCHES MINIMUM AND 0.6263 INCHES MAXIMUM IN

•

ALIGNMENT TYPE: RIGID

•

BORE DIAMETER: 0.4387 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

RETAINER FABRICATION METHOD	PRESSED
SURFACE FINISH	GROUND
STYLE DESIGNATOR	NON-SEPARABLE, OPEN END, DRAWN SHELL
OVERALL WIDTH	0.4900 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER	0.6260 INCHES MINIMUM AND 0.6263 INCHES MAXIMUM IN
ALIGNMENT TYPE	RIGID
SPECIAL FEATURES	EXTRA CAPACITY OUTER RING
BORE DIAMETER	0.4387 INCHES MINIMUM AND 0.4390 INCHES MAXIMUM IN
MATERIAL	STEEL OVERALL

SUBSTITUTES & CROSS-REFERENCES 5

103645Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

PA8542Reference document

Same NSN cross-reference

Reference document — Secondary reference

NB38SPECIALReference document

Same NSN cross-reference

Reference document — Secondary reference

GC-4905Reference document

Same NSN cross-reference

Reference document — Secondary reference

126630Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 980021?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 980021?

980021 is a RESISTOR,FIXED,WIRE WOUND,INDUCT.

What parts can replace 980021?

There are 5 known substitutes for 980021: 103645, PA8542, NB38SPECIAL and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 980021?

980021 is cataloged in the U.S. Government catalog under NSN 3110-00-289-6762. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

980021 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — 980021