PartsTable
Technical Data Sheet
Download PDF

98-9023-127 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

98-9023-127: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.630 INCHES NOMINAL IN, center_hole_diameter: 1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.094 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-641-0799, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
98-9023-127
NSN: 5331-00-641-0799
FSC: 5331 — O-ring
CAGE: 58114 — REXROTH CORP THE MOBILE HYDRAULICS DIV (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.630 INCHES NOMINAL IN
center_hole_diameter1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.094 INCHES NOMINAL IN
NSN5331-00-641-0799
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 98-9023-127 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.094 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 1.630 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CENTER HOLE DIAMETER: 1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.094 INCHES NOMINAL IN
OUTSIDE DIAMETER1.630 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
CENTER HOLE DIAMETER1.412 INCHES MINIMUM AND 1.436 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 9
513CD127Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
ARP568-127MILP5 516BReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
871127Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
2-127Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
AS568C-127Reference document
Same NSN cross-reference
Reference document — Secondary reference
5331PL0755626Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 98-9023-127?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 98-9023-127?
98-9023-127 is a O-RING.
What parts can replace 98-9023-127?
There are 9 known substitutes for 98-9023-127: 513CD127, ARP568-127MILP5 516B, 871127 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 98-9023-127?
98-9023-127 is cataloged in the U.S. Government catalog under NSN 5331-00-641-0799. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 98-9023-127