PartsTable
Technical Data Sheet
PartsTable / O-RING / 98-2048
98-2048 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include overall_length: 21.0 MILLIMETERS NOMINAL MM, size_designator: 06, special_features: STANDARDIZED; SHORT HANDLE; CRES OPERATIVE END, part_name_assigned_by_controlling_agency: FILE PULP CANAL DENTAL STANDARDIZED SZ06 SHORT HANDLE 21MM 6S MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-579-7918, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
98-2048
NSN: 5331-00-579-7918
FSC: 5331 — O-RING
CAGE: 97907 — TEREX CORP (USA)
SPECIFICATIONS
overall_length21.0 MILLIMETERS NOMINAL MM
size_designator06
special_featuresSTANDARDIZED; SHORT HANDLE; CRES OPERATIVE END
part_name_assigned_by_controlling_agencyFILE PULP CANAL DENTAL STANDARDIZED SZ06 SHORT HANDLE 21MM 6S MM
NSN5331-00-579-7918
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 98-2048 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER2.349 INCHES MINIMUM AND 2.369 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.609 INCHES MINIMUM AND 2.665 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 38
220984Interchangeable
interchangeable cross-reference
interchangeable
1866-7Interchangeable
interchangeable cross-reference
interchangeable
492652REV1ITEM43Interchangeable
interchangeable cross-reference
interchangeable
402791Interchangeable
interchangeable cross-reference
interchangeable
002-99955Interchangeable
interchangeable cross-reference
interchangeable
385B207H01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 98-2048?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 98-2048?
98-2048 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace 98-2048?
There are 38 known substitutes for 98-2048: 220984, 1866-7, 492652REV1ITEM43 and 35 more. Substitute compatibility should be verified for your specific system.
Is 98-2048 still available?
98-2048 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 98-2048

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026