PartsTable
Technical Data Sheet
Download PDF

9794-SS-0632-7 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9794-SS-0632-7: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.500 INCHES NOMINAL IN, thread_class: 2B LEFT INTERNAL (INCLUDES THRU THREAD), thread_length: 0.250 INCHES NOMINAL RIGHT EXTERNAL IN, flange_diameter: 0.250 INCHES NOMINAL IN, flange_thickness: 0.250 INCHES NOMINAL IN, style_designator: FLANGED WITH LEFT INTERNAL THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-113-9934, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9794-SS-0632-7
NSN: 5340-01-113-9934
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
length0.500 INCHES NOMINAL IN
thread_class2B LEFT INTERNAL (INCLUDES THRU THREAD)
thread_length0.250 INCHES NOMINAL RIGHT EXTERNAL IN
flange_diameter0.250 INCHES NOMINAL IN
flange_thickness0.250 INCHES NOMINAL IN
style_designatorFLANGED WITH LEFT INTERNAL THREAD
thread_directionRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
surface_treatmentPASSIVATE STANDOFF
nominal_thread_size0.138 INCHES RIGHT EXTERNAL IN
thread_quantity_per_inch32 RIGHT EXTERNAL
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) RIGHT EXTERNAL
material_document_and_classificationASTM A582 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF
NSN5340-01-113-9934
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9794-SS-0632-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.250 INCHES NOMINAL IN
•
LENGTH: 0.500 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE STANDOFF
•
FLANGE THICKNESS: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.250 INCHES NOMINAL RIGHT EXTERNAL IN
•
STYLE DESIGNATOR: FLANGED WITH LEFT INTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.250 INCHES NOMINAL IN
LENGTH0.500 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072,E300 MIL SPEC SINGLE TREATMENT RESPONSE STANDOFF
FLANGE THICKNESS0.250 INCHES NOMINAL IN
THREAD LENGTH0.250 INCHES NOMINAL RIGHT EXTERNAL IN
THREAD LENGTH0.125 INCHES MINIMUM LEFT INTERNAL (INCLUDES THRU THREAD) IN
STYLE DESIGNATORFLANGED WITH LEFT INTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE STANDOFF
THREAD DIRECTIONRIGHT-HAND RIGHT EXTERNAL
THREAD DIRECTIONRIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD)
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9794-SS-0632-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9794-SS-0632-7?
9794-SS-0632-7 is a STANDOFF,THREADED,SPACING.
What is the NSN for 9794-SS-0632-7?
9794-SS-0632-7 is cataloged in the U.S. Government catalog under NSN 5340-01-113-9934. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9794-SS-0632-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.