97931-60: PIN,STRAIGHT,HEADED.
The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, diameter: 0.1567 INCHES MINIMUM AND 0.1572 INCHES MAXIMUM IN, material: STEEL COMP 630 OVERALL, head_style: FLAT, chamfer_length: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN, surface_finish: 125.0 MICROINCHES HEAD OUTSIDE DIAMETER. This part is cataloged in the U.S.
Government catalog under NSN 5315-00-434-7378, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| diameter | 0.1567 INCHES MINIMUM AND 0.1572 INCHES MAXIMUM IN |
| material | STEEL COMP 630 OVERALL |
| head_style | FLAT |
| chamfer_length | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| surface_finish | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| hardness_rating | 40.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL |
| style_designator | STRAIGHT |
| pin_chamfer_angle | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| pin_head_diameter | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
| surface_treatment | ANODIZE OVERALL |
| under_head_length | 0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN |
| NSN | 5315-00-434-7378 |
| SURFACE FINISH | 125.0 MICROINCHES HEAD OUTSIDE DIAMETER |
| SURFACE FINISH | 32.0 MICROINCHES LARGE SHANK |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| UNDER HEAD LENGTH | 0.600 INCHES MINIMUM AND 0.620 INCHES MAXIMUM IN |
| PIN CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN |
| HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 47.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | STRAIGHT |
| PIN HEAD DIAMETER | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.