PartsTable
Technical Data Sheet
Download PDF

9770-6 — SWITCHING GROUP,DIGITAL DATA

✓ Government record, cited
Verbatim · MRO · MRO_GENERAL
PRODUCT OVERVIEW

9770-6: SWITCHING GROUP,DIGITAL DATA.

Verbatim’s USB 3.0 Universal Memory Card Reader makes transferring your digital photos faster and easier than ever. With transfer speeds up to 10 times faster than USB 2.0 readers, and a sleek, modern design, the Universal Memory Card Reader supports a wide variety of memory card formats. Offering plug-and-play functionality with both Windows and Mac operating systems, once connected, you can instantly begin transferring your photos.

This part is cataloged in the U.S. Government catalog under NSN 5310-00-181-6122, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9770-6
NSN: 5310-00-181-6122
NIINs: 001816122, 010782826, 016798656
FSC: 5310 — Nuts and Washers
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)
SPECIFICATIONS
materialRUBBER POLYSULFIDE CLASS T OR RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
nut_styleFLAT WITH TURNED BACK EDGE
temp_rating450.0 FAHRENHEIT MAXIMUM DEGF
thread_class3B
hole_diameter0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.040 INCHES MINIMUM AND 2.080 INCHES MAXIMUM IN
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
aperture_width1.480 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
overall_height0.442 INCHES MINIMUM AND 0.482 INCHES MAXIMUM IN
overall_length3.600 INCHES MINIMUM AND 3.640 INCHES MAXIMUM IN
aperture_length2.540 INCHES MINIMUM AND 2.580 INCHES MAXIMUM IN
special_featuresCONTAINS- UNIVERSAL CARD READER, USB 3.0 CABLE TRANSFER DIGITAL IMAGES TO COMPUTER OR LAPTOP. COMPATIBLE WITH VARITITY OF SYSTEMS.
NSN5310-00-181-6122
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9770-6 · Verbatim ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WASHER OUTSIDE DIAMETER: 0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
•
WIDTH ACROSS FLATS: 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
TEMP RATING: 450.0 FAHRENHEIT MAXIMUM DEGF
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.442 INCHES MINIMUM AND 0.482 INCHES MAXIMUM IN
WASHER OUTSIDE DIAMETER0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
WIDTH ACROSS FLATS0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
TEMP RATING450.0 FAHRENHEIT MAXIMUM DEGF
NUT COUNTERBORE DEPTH0.218 INCHES MINIMUM AND 0.238 INCHES MAXIMUM NUT IN
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 4
5310PL2214105Reference document
Same NSN cross-reference
Reference document — Informative reference only
10116628Reference document
Same NSN cross-reference
Reference document — Informative reference only
FF-N-836Reference document
Same NSN cross-reference
Reference document — Identification reference
MS21244-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9770-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9770-6?
9770-6 is a SWITCHING GROUP,DIGITAL DATA manufactured by Verbatim. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9770-6?
There are 4 known substitutes for 9770-6: 5310PL2214105, 10116628, FF-N-836 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9770-6?
9770-6 is cataloged in the U.S. Government catalog under NSN 5310-00-181-6122. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9770-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.