PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / 977 23/64

977 23/64 — Storage Datasheet

✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

IBM V7000 600 GB 2.5-inch 10K HDD. Key specifications include material: STEEL OVERALL, point_type: SPLIT, point_angle: 135.0 DEGREES NOMINAL, shank_style: STRAIGHT ROUND, flute_length: 3.500 INCHES NOMINAL IN, overall_length: 4.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5133-00-113-4846, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ 977 23/64
NSN: 5133-00-113-4846
FSC: 5133
CAGE: 13130 — CLEVELAND TWIST DRILL CO DIV OF GREENFIELD INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
point_typeSPLIT
point_angle135.0 DEGREES NOMINAL
shank_styleSTRAIGHT ROUND
flute_length3.500 INCHES NOMINAL IN
flute_quantity2
overall_length4.875 INCHES NOMINAL IN
shank_diameter0.359 INCHES NOMINAL IN
special_featuresJOBBERS LG; FRACTIONAL SIZE 23/64
cutting_end_styleGENERAL PURPOSE
nominal_cutting_diameter0.3594 INCHES IN
cutting_rotation_directionRIGHT-HAND
NSN5133-00-113-4846
COMPONENT DIAGRAM
RELEASE LATCH 600GB NL-SAS 10K RPM 977 23/64 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | 600GB | NL-SAS 10K RPM NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN 977 23/64 MFR OEM
KEY FEATURES
•
600GB Capacity
•
10K RPM Speed
•
SHANK STYLE: STRAIGHT ROUND
•
SHANK DIAMETER: 0.359 INCHES NOMINAL IN
•
POINT ANGLE: 135.0 DEGREES NOMINAL
•
FLUTE LENGTH: 3.500 INCHES NOMINAL IN
•
CUTTING END STYLE: GENERAL PURPOSE
•
NOMINAL CUTTING DIAMETER: 0.3594 INCHES IN
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Enterprise storage arrays and SANs
  • Direct-attached storage (DAS) expansion
  • Database tier storage (OLTP, OLAP)
  • Virtual machine datastore expansion
  • Backup-to-disk and disaster recovery targets
  • Content delivery and media streaming storage
TECHNICAL CHARACTERISTICS (FLIS)
SHANK STYLESTRAIGHT ROUND
SHANK DIAMETER0.359 INCHES NOMINAL IN
POINT ANGLE135.0 DEGREES NOMINAL
SPECIAL FEATURESJOBBERS LG; FRACTIONAL SIZE 23/64
FLUTE LENGTH3.500 INCHES NOMINAL IN
CUTTING END STYLEGENERAL PURPOSE
NOMINAL CUTTING DIAMETER0.3594 INCHES IN
MATERIALSTEEL OVERALL
CUTTING ROTATION DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATAB TYPE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
40466Interchangeable
interchangeable cross-reference
interchangeable
1583908-2Interchangeable
interchangeable cross-reference
interchangeable
1820660Interchangeable
interchangeable cross-reference
interchangeable
320-6Interchangeable
IBM V7000 600 GB 2.5-inch 10K HDD
interchangeable
D3121-320-6Interchangeable
interchangeable cross-reference
interchangeable
209905Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 977 23/64?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 977 23/64?
977 23/64 is a IBM V7000 600 GB 2.5-inch 10K HDD. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace 977 23/64?
There are 32 known substitutes for 977 23/64: 40466, 1583908-2, 1820660 and 29 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 977 23/64?
977 23/64 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5133-00-113-4846. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 977 23/64

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026