PartsTable
Technical Data Sheet
Download PDF

9767SS0632-7 — STANDOFF,THREADED,SPACING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9767SS0632-7: STANDOFF,THREADED,SPACING.

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 2.250 INCHES NOMINAL IN, material: STEEL COMP 303 OVERALL, groove_width: 0.062 INCHES NOMINAL IN, thread_length: 0.188 INCHES NOMINAL RIGHT EXTERNAL IN, groove_diameter: 0.099 INCHES NOMINAL IN, style_designator: LEFT INTERNAL AND RIGHT EXTERNAL THREAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-763-0134, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9767SS0632-7
NSN: 5340-00-763-0134
FSC: 5340 — Hardware, Commercial
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
length2.250 INCHES NOMINAL IN
materialSTEEL COMP 303 OVERALL
groove_width0.062 INCHES NOMINAL IN
thread_length0.188 INCHES NOMINAL RIGHT EXTERNAL IN
groove_diameter0.099 INCHES NOMINAL IN
style_designatorLEFT INTERNAL AND RIGHT EXTERNAL THREAD
surface_treatmentPASSIVATE OVERALL
width_across_flats0.375 INCHES NOMINAL IN
cross-sectional_shapeHEXAGON
material_document_and_classificationQQ-S-764, CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-14072, FINISH E303 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-763-0134
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9767SS0632-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
LENGTH: 2.250 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-14072, FINISH E303 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
GROOVE DIAMETER: 0.099 INCHES NOMINAL IN
•
THREAD LENGTH: 0.188 INCHES NOMINAL RIGHT EXTERNAL IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT EXTERNAL THREAD
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-764, CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
LENGTH2.250 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-14072, FINISH E303 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
GROOVE DIAMETER0.099 INCHES NOMINAL IN
THREAD LENGTH0.188 INCHES NOMINAL RIGHT EXTERNAL IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT EXTERNAL THREAD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-764, CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPEHEXAGON
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 303 OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
NAS1829C6E36Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9767SS0632-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9767SS0632-7?
9767SS0632-7 is a STANDOFF,THREADED,SPACING.
What parts can replace 9767SS0632-7?
There is 1 known substitute for 9767SS0632-7: NAS1829C6E36. Substitute compatibility should be verified for your specific system.
What is the NSN for 9767SS0632-7?
9767SS0632-7 is cataloged in the U.S. Government catalog under NSN 5340-00-763-0134. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9767SS0632-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.