Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, shell_type: SOLID, body_length: 2.126 INCHES MAXIMUM IN, body_diameter: 1.240 INCHES MAXIMUM IN, hole_diameter: 0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the Federal Logistics Information System under NSN 5330-00-698-5120, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO→MRO_GENERAL→97621
NSN:5330-00-698-5120 FSC:5330 CAGE:15434 — CUMMINS INC. (USA)
SPECIFICATIONS
material
PAPER AND GLUE AND GLYCERIN OVERALL
body_style
W/O MTG FACILITIES, AXIAL TERMINALS
shell_type
SOLID
body_length
2.126 INCHES MAXIMUM IN
body_diameter
1.240 INCHES MAXIMUM IN
hole_diameter
0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width
2.406 INCHES NOMINAL IN
terminal_type
SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
overall_length
4.156 INCHES NOMINAL IN
contact_material
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
overall_diameter
0.543 INCHES NOMINAL IN
special_features
TWO BOLT HOLES 0.328 IN. DIA; ONE BOLT HOLE 0.156 IN. DIA; ONE BOLT HOLE 0.406 IN DIA IN
NSN
5330-00-698-5120
COMPONENT DIAGRAM
KEY FEATURES
•
HOLE DIAMETER: 0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 3
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.036 INCHES NOMINAL IN
TYPICAL APPLICATIONS
RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
HOLE DIAMETER
0.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH
4.156 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE
SOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY
3
MATERIAL DOCUMENT AND CLASSIFICATION
HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
CROSS-SECTIONAL THICKNESS
0.036 INCHES NOMINAL IN
OVERALL WIDTH
2.406 INCHES NOMINAL IN
SPECIAL FEATURES
TWO BOLT HOLES 0.328 IN. DIA; ONE BOLT HOLE 0.156 IN. DIA; ONE BOLT HOLE 0.406 IN DIA IN