PartsTable
Technical Data Sheet
Download PDF

975905 — LOOP,STRAP FASTENER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

975905: LOOP,STRAP FASTENER.

The LOOP,STRAP FASTENER is a the manufacturer industrial component. Key specifications include material: STEEL, hole_diameter: 0.219 INCHES NOMINAL IN, inside_height: 0.375 INCHES NOMINAL IN, inside_length: 1.094 INCHES NOMINAL IN, outside_width: 0.563 INCHES NOMINAL IN, painted_feature: INCLUDED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-653-7275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
975905
NSN: 5340-00-653-7275
FSC: 5340 — Hardware, Commercial
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
materialSTEEL
hole_diameter0.219 INCHES NOMINAL IN
inside_height0.375 INCHES NOMINAL IN
inside_length1.094 INCHES NOMINAL IN
outside_width0.563 INCHES NOMINAL IN
painted_featureINCLUDED
special_featuresHOLES COUNTERSUNK 82 DEG TO 3/8 IN. DIA FROM TOP IN
style_designatorFOOTMANS LOOP
center_to_center_distance_between_holes2.125 INCHES NOMINAL IN
NSN5340-00-653-7275
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 975905 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE LENGTH: 1.094 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FOOTMANS LOOP
•
PAINTED FEATURE: INCLUDED
•
CENTER TO CENTER DISTANCE BETWEEN HOLES: 2.125 INCHES NOMINAL IN
•
OUTSIDE WIDTH: 0.563 INCHES NOMINAL IN
•
COLOR: OLIVE DRAB
•
MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
INSIDE LENGTH1.094 INCHES NOMINAL IN
STYLE DESIGNATORFOOTMANS LOOP
PAINTED FEATUREINCLUDED
CENTER TO CENTER DISTANCE BETWEEN HOLES2.125 INCHES NOMINAL IN
OUTSIDE WIDTH0.563 INCHES NOMINAL IN
COLOROLIVE DRAB
SPECIAL FEATURESHOLES COUNTERSUNK 82 DEG TO 3/8 IN. DIA FROM TOP IN
MATERIALSTEEL
INSIDE HEIGHT0.375 INCHES NOMINAL IN
HOLE DIAMETER0.219 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
7697591Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 975905?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 975905?
975905 is a LOOP,STRAP FASTENER.
What parts can replace 975905?
There is 1 known substitute for 975905: 7697591. Substitute compatibility should be verified for your specific system.
What is the NSN for 975905?
975905 is cataloged in the U.S. Government catalog under NSN 5340-00-653-7275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 975905