PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 97504
97504 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL SHIELD, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-114-6006, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
97504
NSN: 3110-00-114-6006
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL SHIELD
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
NSN3110-00-114-6006
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 97504 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL: GREASE
•
MATERIAL: STEEL SHIELD
•
SHIELD QUANTITY: 1
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BEARING SEAL TYPE: CONTACT
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIALGREASE
OVERALL WIDTH14.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL SHIELD
SHIELD QUANTITY1
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
INTERNAL FIT-UP DESIGNATIONSTANDARD
BEARING SEAL TYPECONTACT
SURFACE FINISHGROUND
MATERIALSTEEL RETAINER
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
31-165Interchangeable
interchangeable cross-reference
interchangeable
B70Interchangeable
interchangeable cross-reference
interchangeable
E64-7Interchangeable
interchangeable cross-reference
interchangeable
B94.19Interchangeable
interchangeable cross-reference
interchangeable
610107-1Interchangeable
interchangeable cross-reference
interchangeable
10-200612-03SInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 97504?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 97504?
97504 is a BEARING,BALL,ANNULAR.
What parts can replace 97504?
There are 13 known substitutes for 97504: 31-165, B70, E64-7 and 10 more. Substitute compatibility should be verified for your specific system.
Is 97504 still available?
97504 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 97504

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026