PartsTable
Technical Data Sheet
Download PDF

9733099-3 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9733099-3: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 316 OVERALL, nut_style: HEXAGON, nut_height: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-959-0431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9733099-3
NSN: 5310-00-959-0431
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 316 OVERALL
nut_styleHEXAGON
nut_height0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.562 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
nominal_thread_size0.437 INCHES IN
bearing_surface_typeCHAMFERED
counterbore_diameter0.443 INCHES NOMINAL NUT IN
NSN5310-00-959-0431
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9733099-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.562 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.437 INCHES IN
•
COUNTERBORE DIAMETER: 0.443 INCHES NOMINAL NUT IN
•
NUT HEIGHT: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.562 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.437 INCHES IN
COUNTERBORE DIAMETER0.443 INCHES NOMINAL NUT IN
NUT HEIGHT0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
COUNTERSINK ANGLE90.0 DEGREES NOMINAL NUT
NUT STYLEHEXAGON
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
4L5NSSReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9733099-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9733099-3?
9733099-3 is a NUT,PLAIN,HEXAGON.
What parts can replace 9733099-3?
There is 1 known substitute for 9733099-3: 4L5NSS. Substitute compatibility should be verified for your specific system.
What is the NSN for 9733099-3?
9733099-3 is cataloged in the U.S. Government catalog under NSN 5310-00-959-0431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9733099-3