PartsTable
Technical Data Sheet
Download PDF

97205 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

97205: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OR RUBBER SYNTHETIC SHIELD, bore_shape: STRAIGHT, bore_diameter: 25.0 MILLIMETERS NOMINAL MM, overall_width: 15.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-043-0441, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
97205
NSN: 5305-00-043-0441
NIINs: 000430441, 001146007, 001631395, 004138172
FSC: 5305 — Screws
CAGE: 1PQF4 — CAE USA INC. (USA)
SPECIFICATIONS
materialSTEEL OR RUBBER SYNTHETIC SHIELD
bore_shapeSTRAIGHT
bore_diameter25.0 MILLIMETERS NOMINAL MM
overall_width15.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter52.0 MILLIMETERS NOMINAL MM
NSN5305-00-043-0441
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 97205 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
THREAD LENGTH1.000 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA2 TYPE AND 10P STYLE
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
20&55Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 97205?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 97205?
97205 is a BEARING,BALL,ANNULAR.
What parts can replace 97205?
There is 1 known substitute for 97205: 20&55. Substitute compatibility should be verified for your specific system.
What is the NSN for 97205?
97205 is cataloged in the U.S. Government catalog under NSN 5305-00-043-0441. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 97205

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.