PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 97121-414R
97121-414R ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SHIPPING CAP is a the manufacturer industrial component. Key specifications include criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: MATERIAL WILL BE IN ACCORDANCE WITH NAVSUP-WSS ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-493-5835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
97121-414R
NSN: 5340-00-493-5835
FSC: 5340
CAGE: 02660 — AMPHENOL CORP SPECTRA-STRIP/ITD (USA)
SPECIFICATIONS
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVSUP-WSS ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
NSN5340-00-493-5835
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 97121-414R MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INSIDE DIAMETER LENGTH: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
•
OVERALL DIAMETER: 1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC, POLYETHYLENE (PP)
•
DESIGN TYPE: FRICTION
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCOLOR,RED
INSIDE DIAMETER LENGTH0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
OVERALL DIAMETER1.094 INCHES MINIMUM AND 1.156 INCHES MAXIMUM IN
MATERIALPLASTIC, POLYETHYLENE (PP)
DESIGN TYPEFRICTION
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.840 INCHES MINIMUM AND 0.860 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
34310513017Upgraded Successor
successor cross-reference
successor
90980012Upgraded Successor
successor cross-reference
successor
NAS831-8Upgraded Successor
successor cross-reference
successor
686B012810Upgraded Successor
successor cross-reference
successor
NAS831-10Upgraded Successor
successor cross-reference
successor
70777Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 97121-414R?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 97121-414R?
97121-414R is a SHIPPING CAP.
What parts can replace 97121-414R?
There are 27 known substitutes for 97121-414R: 34310513017, 90980012, NAS831-8 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 97121-414R?
97121-414R is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-493-5835. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 97121-414R

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026