PartsTable
Technical Data Sheet
Download PDF

9712-1M3307-001 — BRACKET,MULTIPLE ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9712-1M3307-001: BRACKET,MULTIPLE ANGLE.

The BRACKET,MULTIPLE ANGLE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, surface_treatment: PAINT, part_name_assigned_by_controlling_agency: BRACKET,HING EMERGENCY COVER. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-569-2999, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9712-1M3307-001
NSN: 5340-01-569-2999
FSC: 5340 — Hardware, Commercial
CAGE: 0NV92 — COMPRO COMPUTER SERVICES, INC. DBA COMPRO COMPUTER SERVICES INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
surface_treatmentPAINT
part_name_assigned_by_controlling_agencyBRACKET,HING EMERGENCY COVER
NSN5340-01-569-2999
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9712-1M3307-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PAINT
•
MATERIAL: ALUMINUM ALLOY 6061
TECHNICAL CHARACTERISTICS
SPECIAL FEATURESSHELF-LIKE BRACKET APPROXIMATELY 3.0L X0.5WX0.685H INCHES; HAVING TWO LEGS CENTERED 1.990 INCHES APART AND THIRD LEG PERPENDICULAR TO THE OTHER TWOCENTEREDXC BETWEEN THEM ON THE FRONT EDGE OF MAIN BODY;MAIN BODY HAS TWO MOUNTING HOLES 0.138-32UNC-2B THRU LOCATED 2.650 INCHES APART AT A POINT 0.305 INCHES FROM FRONT EDGE;TWO LEGS HAVE ONE THRU HOLE 0.095 INCH DIAMETER AND ONE HOLE 0.112-48UNF-2B THRU, LOCATED 0.101 INCHES APART IN WIDTH AND 0.052 INCHES APART IN LENGTH AT A POINT 0.564INCHES FROM MAIN BODY;THIRD LEG HAS TWO SLOTS CENTERED AT 0.190 INCHES APARTAT A POINT 0.210 INCHES FROM MAIN BODY;MAIN BODY HAS SLOT IMMEDIATELY BEHINDTHIRD LEG AT 0.600 INCHES IN LENGTH IN
SURFACE TREATMENTPAINT
PART NAME ASSIGNED BY CONTROLLING AGENCYBRACKET,HING EMERGENCY COVER
MATERIALALUMINUM ALLOY 6061
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
241 0NV929712-1M3307-001Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9712-1M3307-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9712-1M3307-001?
9712-1M3307-001 is a BRACKET,MULTIPLE ANGLE.
What parts can replace 9712-1M3307-001?
There is 1 known substitute for 9712-1M3307-001: 241 0NV929712-1M3307-001. Substitute compatibility should be verified for your specific system.
What is the NSN for 9712-1M3307-001?
9712-1M3307-001 is cataloged in the U.S. Government catalog under NSN 5340-01-569-2999. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9712-1M3307-001