PartsTable
Technical Data Sheet
Download PDF

9688430306 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9688430306: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include temp_rating: -20.0 CELSIUS AND 250.0 CELSIUS DEGC, hardness_rating: 50.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL, aperture_diameter: 1.310 INCHES NOMINAL IN, end_item_identification: NSN 2330-01-304-2277 PLS (PALLETIZED LOADING SYSTEM), cross-sectional_thickness: 0.060 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-058-7118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9688430306
NSN: 5330-01-058-7118
FSC: 5330 — Packing and Gasket Materials
CAGE: S4080 — PILATUS AIRCRAFT LTD (CHE)
SPECIFICATIONS
temp_rating-20.0 CELSIUS AND 250.0 CELSIUS DEGC
hardness_rating50.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
aperture_diameter1.310 INCHES NOMINAL IN
bolt_hole_quantity3
end_item_identificationNSN 2330-01-304-2277 PLS (PALLETIZED LOADING SYSTEM)
cross-sectional_thickness0.060 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-058-7118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9688430306 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 CELSIUS AND 250.0 CELSIUS DEGC
•
CROSS-SECTIONAL THICKNESS: 0.060 INCHES NOMINAL IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.310 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 3
TECHNICAL CHARACTERISTICS
TEMP RATING-20.0 CELSIUS AND 250.0 CELSIUS DEGC
CROSS-SECTIONAL THICKNESS0.060 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
APERTURE DIAMETER1.310 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
END ITEM IDENTIFICATIONNSN 2330-01-304-2277 PLS (PALLETIZED LOADING SYSTEM)
SUBSTITUTES & CROSS-REFERENCES 1
92-158Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9688430306?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9688430306?
9688430306 is a GASKET.
What parts can replace 9688430306?
There is 1 known substitute for 9688430306: 92-158. Substitute compatibility should be verified for your specific system.
What is the NSN for 9688430306?
9688430306 is cataloged in the U.S. Government catalog under NSN 5330-01-058-7118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9688430306