PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9682013407
9682013407 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 321, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.500 INCHES NOMINAL IN, first_leg_length: 0.700 INCHES NOMINAL IN, style_designator: ANGLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-119-7504, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9682013407
NSN: 5340-00-119-7504
FSC: 5340
CAGE: S4080 — PILATUS AIRCRAFT LTD (CHE)
SPECIFICATIONS
materialSTEEL COMP 321
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.500 INCHES NOMINAL IN
first_leg_length0.700 INCHES NOMINAL IN
style_designatorANGLE
second_leg_length1.325 INCHES NOMINAL IN
first_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_end_radius0.500 INCHES NOMINAL IN
second_leg_thickness0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
first_leg_hole_diameter0.200 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
first_leg_hole_arrangement_styleONE HOLE
NSN5340-00-119-7504
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9682013407 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 321
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
•
FIRST LEG LENGTH: 0.700 INCHES NOMINAL IN
•
FIRST LEG STYLE: END RADIUS
•
FIRST LEG HOLE ARRANGEMENT STYLE: ONE HOLE
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG WIDTH: 0.500 INCHES NOMINAL IN
•
FIRST LEG END RADIUS: 0.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 321
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM IN
FIRST LEG LENGTH0.700 INCHES NOMINAL IN
FIRST LEG STYLEEND RADIUS
FIRST LEG HOLE ARRANGEMENT STYLEONE HOLE
STYLE DESIGNATORANGLE
FIRST LEG WIDTH0.500 INCHES NOMINAL IN
FIRST LEG END RADIUS0.500 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGIDENTICAL
FIRST LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MS9592-009Upgraded Successor
successor cross-reference
successor
SAE-AS9592Upgraded Successor
successor cross-reference
successor
MS9592-138Upgraded Successor
successor cross-reference
successor
MS9592-222Upgraded Successor
successor cross-reference
successor
M85049/138-63AUpgraded Successor
successor cross-reference
successor
MS25177-32Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9682013407?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9682013407?
9682013407 is a BRACKET,ANGLE.
What parts can replace 9682013407?
There are 10 known substitutes for 9682013407: MS9592-009, SAE-AS9592, MS9592-138 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9682013407?
9682013407 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-119-7504. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9682013407

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026