PartsTable
Technical Data Sheet
Download PDF

96725W — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

96725W: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, pin_overall_length: 4.625 INCHES NOMINAL IN, first_hole_diameter: 0.125 INCHES NOMINAL IN, pin_overall_diameter: 0.8750 INCHES NOMINAL IN, first_end_taper_angle: 45.0 DEGREES NOMINAL. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-245-9711, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96725W
NSN: 5315-00-245-9711
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 60848 — ALLIED SYSTEMS COMPANY DBA ALLIED SYSTEMS CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
pin_overall_length4.625 INCHES NOMINAL IN
first_hole_diameter0.125 INCHES NOMINAL IN
pin_overall_diameter0.8750 INCHES NOMINAL IN
first_end_taper_angle45.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
hole_arrangement_styleDRILLED THRU CENTER
second_end_relationship_with_first_endIDENTICAL
NSN5315-00-245-9711
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 96725W · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: DRILLED THRU CENTER
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 45.0 DEGREES NOMINAL
•
PIN OVERALL DIAMETER: 0.8750 INCHES NOMINAL IN
•
PIN OVERALL LENGTH: 4.625 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
TECHNICAL CHARACTERISTICS
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEDRILLED THRU CENTER
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.125 INCHES NOMINAL IN
FIRST END TAPER ANGLE45.0 DEGREES NOMINAL
PIN OVERALL DIAMETER0.8750 INCHES NOMINAL IN
PIN OVERALL LENGTH4.625 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
96725Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 96725W?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96725W?
96725W is a PIN,STRAIGHT,HEADLESS.
What parts can replace 96725W?
There is 1 known substitute for 96725W: 96725. Substitute compatibility should be verified for your specific system.
What is the NSN for 96725W?
96725W is cataloged in the U.S. Government catalog under NSN 5315-00-245-9711. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96725W