PartsTable
Technical Data Sheet
PartsTable / O-RING / 9672548
9672548 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-641-8283, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9672548
NSN: 5331-00-641-8283
FSC: 5331 — O-RING
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-641-8283
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9672548 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
5910HNFTHDInterchangeable
interchangeable cross-reference
interchangeable
11507Interchangeable
interchangeable cross-reference
interchangeable
303191Interchangeable
interchangeable cross-reference
interchangeable
PRP902-6Interchangeable
interchangeable cross-reference
interchangeable
4369595Interchangeable
interchangeable cross-reference
interchangeable
50325Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9672548?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9672548?
9672548 is a O-RING.
What parts can replace 9672548?
There are 14 known substitutes for 9672548: 5910HNFTHD, 11507, 303191 and 11 more. Substitute compatibility should be verified for your specific system.
Is 9672548 still available?
9672548 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9672548

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026