PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 96715
96715 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

HOLDER,ELECTRICAL CONTACT BRUSH. Key specifications include diameter: 0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN, material: STEEL COMP 4130 OVERALL, hole_diameter: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 0.500 INCHES NOMINAL IN, chamfer_length: 0.093 INCHES NOMINAL IN, overall_length: 6.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-317-1621, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96715
NSN: 5330-00-317-1621
FSC: 5330
CAGE: 60917 — R/P INTL TECHNOLOGIES INC (USA)
SPECIFICATIONS
diameter0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM IN
materialSTEEL COMP 4130 OVERALL
hole_diameter0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width0.500 INCHES NOMINAL IN
chamfer_length0.093 INCHES NOMINAL IN
overall_length6.500 INCHES NOMINAL IN
hardness_rating27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
special_features3 CORNERS ARE SQUARE,ONE CORNER IS ROUNDED WITH 0.250 IN. RADIUS IN
style_designatorSTRAIGHT
features_providedCASEHARDENED
pin_chamfer_angle45.0 DEGREES NOMINAL
under_head_length0.563 INCHES NOMINAL IN
NSN5330-00-317-1621
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 96715 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
HARDNESS RATING: 50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
FSC APPLICATION DATA: COMPUTERS RANGE,AIRCRAFT GUNNERY FIRE CONTROL
•
HOLE DIAMETER: 0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE0.250 INCHES NOMINAL IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
OVERALL WIDTH0.500 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
FSC APPLICATION DATACOMPUTERS RANGE,AIRCRAFT GUNNERY FIRE CONTROL
HOLE DIAMETER0.188 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH6.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
SPECIAL FEATURES3 CORNERS ARE SQUARE,ONE CORNER IS ROUNDED WITH 0.250 IN. RADIUS IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
96715Interchangeable
interchangeable cross-reference
interchangeable
2896715Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 96715?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96715?
96715 is a HOLDER,ELECTRICAL CONTACT BRUSH.
What parts can replace 96715?
There are 2 known substitutes for 96715: 96715, 2896715. Substitute compatibility should be verified for your specific system.
What is the NSN for 96715?
96715 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-317-1621. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96715

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026