PartsTable
Technical Data Sheet
Download PDF

967043-1C — SLIDE,DRAWER,EXTENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

967043-1C: SLIDE,DRAWER,EXTENSION.

The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN, material: ALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 7075 OVERALL, closed_length: 25.970 INCHES MINIMUM AND 26.030 INCHES MAXIMUM IN, extended_length: 60.000 INCHES NOMINAL IN, mounting_method: THREADED HOLE(S), surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-307-4815, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
967043-1C
NSN: 5340-01-307-4815
FSC: 5340 — Hardware, Commercial
CAGE: 82577 — RAYTHEON COMPANY DBA RAYTHEON (USA)
SPECIFICATIONS
width0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
materialALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 7075 OVERALL
closed_length25.970 INCHES MINIMUM AND 26.030 INCHES MAXIMUM IN
extended_length60.000 INCHES NOMINAL IN
mounting_methodTHREADED HOLE(S)
special_featuresDRY FILM LUB PER MIL-L-8937; SEC 1 ROTATES AND LOCKS AT 45 AND 90 DEG LOGITUDINAL; LINEAR SLIDE LOCKS HAVE QUICK DISCONNECT
surface_treatmentANODIZE OVERALL
side_for_which_designedLEFT HAND
material_document_and_classificationQQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-307-4815
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 967043-1C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
EXTENDED LENGTH: 60.000 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
CLOSED LENGTH: 25.970 INCHES MINIMUM AND 26.030 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ANODIZE OVERALL
•
WIDTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED LENGTH60.000 INCHES NOMINAL IN
MOUNTING METHODTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200 FED SPEC ALL MATERIAL RESPONSES OVERALL
CLOSED LENGTH25.970 INCHES MINIMUM AND 26.030 INCHES MAXIMUM IN
SPECIAL FEATURESDRY FILM LUB PER MIL-L-8937; SEC 1 ROTATES AND LOCKS AT 45 AND 90 DEG LOGITUDINAL; LINEAR SLIDE LOCKS HAVE QUICK DISCONNECT
SURFACE TREATMENTANODIZE OVERALL
WIDTH0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY 2014 OR ALUMINUM ALLOY 7075 OVERALL
SIDE FOR WHICH DESIGNEDLEFT HAND
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 967043-1C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 967043-1C?
967043-1C is a SLIDE,DRAWER,EXTENSION.
What is the NSN for 967043-1C?
967043-1C is cataloged in the U.S. Government catalog under NSN 5340-01-307-4815. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 967043-1C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.