PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9667
9667 ✓ Verified by PartsTable
Bestway · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SHIFTER FORK,VEHICULAR is a Bestway industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, outside_diameter: 1.756 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 1.756 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-3306, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9667
NSN: 5330-00-118-3306
FSC: 5330
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
outside_diameter1.756 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter1.756 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.969 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2000 FEET PER MINUTE FT
NSN5330-00-118-3306
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9667 MFR: Bestway ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.000 INCHES MINIMUM AND 1.469 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: ASBESTOS AND RUBBER SYNTHETIC OVERALL
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE DIAMETER: 0.953 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.156 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL WIDTH1.969 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.000 INCHES MINIMUM AND 1.469 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALASBESTOS AND RUBBER SYNTHETIC OVERALL
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3232 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
APERTURE DIAMETER0.953 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
HOLE DIAMETER0.266 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OVERALL LENGTH2.126 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
2-055-024-375Interchangeable
interchangeable cross-reference
interchangeable
30-20080Interchangeable
interchangeable cross-reference
interchangeable
H2HC-DM7044-HW1-50Interchangeable
interchangeable cross-reference
interchangeable
4457Interchangeable
interchangeable cross-reference
interchangeable
08-50163Interchangeable
interchangeable cross-reference
interchangeable
7349581Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9667?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9667?
9667 is a SHIFTER FORK,VEHICULAR manufactured by Bestway.
What parts can replace 9667?
There are 12 known substitutes for 9667: 2-055-024-375, 30-20080, H2HC-DM7044-HW1-50 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9667?
9667 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-3306. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9667

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026