PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 966214-014
966214-014 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, temp_rating: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, center_hole_diameter: 0.513 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN, cross-sectional_height: 0.049 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-821-7499, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
966214-014
NSN: 5330-00-821-7499
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
temp_rating-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
center_hole_diameter0.513 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN
cross-sectional_height0.049 INCHES NOMINAL IN
cross-sectional_shape_styleV
material_document_and_classificationN300-9,FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-821-7499
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 966214-014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
PERIPHERAL DIAMETER: 0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: N300-9,FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: V
•
TEMP RATING: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.513 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.049 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC OVERALL
PERIPHERAL DIAMETER0.613 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONN300-9,FSCM 83259 MFR REF SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLEV
TEMP RATING-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.513 INCHES MINIMUM AND 0.523 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.049 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
10119499Interchangeable
interchangeable cross-reference
interchangeable
MS28774-14Interchangeable
interchangeable cross-reference
interchangeable
Z00.N7762061014Interchangeable
interchangeable cross-reference
interchangeable
8-014NInterchangeable
Same NIIN cross-reference
interchangeable
966214-14Interchangeable
Same NIIN cross-reference
interchangeable
8-014N300-9Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 966214-014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 966214-014?
966214-014 is a RETAINER,PACKING.
What parts can replace 966214-014?
There are 6 known substitutes for 966214-014: 10119499, MS28774-14, Z00.N7762061014 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 966214-014?
966214-014 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-821-7499. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 966214-014

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026