PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 96437A
96437A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 2.4375 INCHES NOMINAL IN, bore_diameter: 4.0000 INCHES NOMINAL IN, overall_width: 3.2529 INCHES NOMINAL IN, standout_width: 0.4062 INCHES NOMINAL IN, special_features: W/CONE SPACER,0.0030 IN. MIN.

0.0050 IN. MAX BENCH LATERIAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-194-3696, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96437A
NSN: 3110-00-194-3696
FSC: 3110
CAGE: 30076 — HYSTER-YALE GROUP, INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width2.4375 INCHES NOMINAL IN
bore_diameter4.0000 INCHES NOMINAL IN
overall_width3.2529 INCHES NOMINAL IN
standout_width0.4062 INCHES NOMINAL IN
special_featuresW/CONE SPACER,0.0030 IN. MIN. 0.0050 IN. MAX BENCH LATERIAL IN
style_designatorSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, STEEP ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.0310 INCHES NOMINAL IN
overall_outside_diameter6.3750 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-194-3696
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 96437A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 2.4375 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 4.0000 INCHES NOMINAL IN
•
OVERALL OUTSIDE DIAMETER: 6.3750 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.4062 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0310 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CUP WIDTH2.4375 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
SPECIAL FEATURESW/CONE SPACER,0.0030 IN. MIN. 0.0050 IN. MAX BENCH LATERIAL IN
BORE DIAMETER4.0000 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER6.3750 INCHES NOMINAL IN
STANDOUT WIDTH0.4062 INCHES NOMINAL IN
OVERALL WIDTH3.2529 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0310 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, DOUBLE CUP, SINGLE CONES, STEEP ANGLE
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
52400Interchangeable
interchangeable cross-reference
interchangeable
127841Interchangeable
interchangeable cross-reference
interchangeable
XX6504702Interchangeable
interchangeable cross-reference
interchangeable
K817Interchangeable
interchangeable cross-reference
interchangeable
44438Interchangeable
interchangeable cross-reference
interchangeable
15865Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 96437A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96437A?
96437A is a BEARING,ROLLER,TAPERED.
What parts can replace 96437A?
There are 13 known substitutes for 96437A: 52400, 127841, XX6504702 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 96437A?
96437A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-194-3696. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96437A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026