PartsTable
Technical Data Sheet
Download PDF

96379A372 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

96379A372: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, head_height: 0.234 INCHES NOMINAL IN, thread_class: 3A A, head_diameter: 0.781 INCHES NOMINAL IN, thread_length: 1.25 INCHES MINIMUM AND 1.81 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-626-1806, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96379A372
NSN: 5305-01-626-1806
FSC: 5305 — Screws
CAGE: 07609 — NAVAL SURFACE WARFARE CENTER DAHLGREN DIV (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
head_height0.234 INCHES NOMINAL IN
thread_class3A A
head_diameter0.781 INCHES NOMINAL IN
thread_length1.25 INCHES MINIMUM AND 1.81 INCHES MAXIMUM IN
fastener_length2.766 INCHES NOMINAL IN
hardness_rating32.0 ROCKWELL C NOMINAL OVERALL
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
width_across_flats0.218 INCHES NOMINAL IN
internal_drive_styleHEXAGON
NSN5305-01-626-1806
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 96379A372 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.218 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.234 INCHES NOMINAL IN
•
FASTENER LENGTH: 2.766 INCHES NOMINAL IN
•
THREAD LENGTH: 1.25 INCHES MINIMUM AND 1.81 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C NOMINAL OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.218 INCHES NOMINAL IN
HEAD HEIGHT0.234 INCHES NOMINAL IN
FASTENER LENGTH2.766 INCHES NOMINAL IN
THREAD LENGTH1.25 INCHES MINIMUM AND 1.81 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C NOMINAL OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
MINIMUM TENSILE STRENGTH120000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLEHEXAGON
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
91253A372Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 96379A372?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96379A372?
96379A372 is a SCREW,CAP,SOCKET HEAD.
What parts can replace 96379A372?
There is 1 known substitute for 96379A372: 91253A372. Substitute compatibility should be verified for your specific system.
What is the NSN for 96379A372?
96379A372 is cataloged in the U.S. Government catalog under NSN 5305-01-626-1806. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96379A372

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.