PartsTable
Technical Data Sheet
PartsTable / O-RING / 9635 PC.40
9635 PC.40 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The 9635 PC.40 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-213-6128, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9635 PC.40
NSN: 5331-01-213-6128
FSC: 5331 — O-RING
CAGE: 01343 — ANDERSON GREENWOOD LP DBA ANDERSON GREENWOOD CROSBY (USA)
SPECIFICATIONS
Part Number9635 PC.40
NSN5331-01-213-6128
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9635 PC.40 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
CRITICALITY CODE JUSTIFICATION: ADYT
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
OUTSIDE DIAMETER: 1.199 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
CRITICALITY CODE JUSTIFICATIONADYT
ELONGATION PERCENTAGE160 MAXIMUM
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
OUTSIDE DIAMETER1.199 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.911 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
E540-80 AS568-213Interchangeable
interchangeable cross-reference
interchangeable
2-213E540-80Interchangeable
interchangeable cross-reference
interchangeable
20186PC43Interchangeable
interchangeable cross-reference
interchangeable
5920PL0647905Interchangeable
interchangeable cross-reference
interchangeable
S222002Interchangeable
interchangeable cross-reference
interchangeable
GE8421-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9635 PC.40?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9635 PC.40?
9635 PC.40 is a 9635 PC.40.
What parts can replace 9635 PC.40?
There are 26 known substitutes for 9635 PC.40: E540-80 AS568-213, 2-213E540-80, 20186PC43 and 23 more. Substitute compatibility should be verified for your specific system.
Is 9635 PC.40 still available?
9635 PC.40 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9635 PC.40

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026