PartsTable
Technical Data Sheet
Download PDF

9630M74P02 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9630M74P02: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY AND RUBBER OVERALL, temp_rating: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, hole_diameter: 0.337 INCHES MINIMUM AND 0.350 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 6.702 INCHES MINIMUM AND 6.782 INCHES MAXIMUM IN, overall_length: 7.481 INCHES MINIMUM AND 7.561 INCHES MAXIMUM IN, gage_ring_thickness: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-110-6222, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9630M74P02
NSN: 5330-00-110-6222
FSC: 5330 — Packing and Gasket Materials
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY AND RUBBER OVERALL
temp_rating-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
hole_diameter0.337 INCHES MINIMUM AND 0.350 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width6.702 INCHES MINIMUM AND 6.782 INCHES MAXIMUM IN
overall_length7.481 INCHES MINIMUM AND 7.561 INCHES MAXIMUM IN
special_featuresGASKET HAS 4 APERTURES WITH THE FOLLOWING DIAMETERS: MIN 0.480 IN. AND MAX 0.520 IN.; MIN 1.050 IN. AND MAX 1.074 IN.; MIN 1.238 IN. AND MAX 1.262 IN.; MIN 1.374 IN. AND MAX 1.376 IN. IN
gage_ring_thickness0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
outside_corner_radius0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
maximum_pressure_rating1500.0 POUNDS PER SQUARE INCH (PSI) LBS
cross-sectional_thickness0.122 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
NSN5330-00-110-6222
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9630M74P02 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL THICKNESS: 0.122 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
•
GAGE RING THICKNESS: 0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
MAXIMUM PRESSURE RATING: 1500.0 POUNDS PER SQUARE INCH (PSI) LBS
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL THICKNESS0.122 INCHES MINIMUM AND 0.145 INCHES MAXIMUM IN
GAGE RING THICKNESS0.086 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
MAXIMUM PRESSURE RATING1500.0 POUNDS PER SQUARE INCH (PSI) LBS
OVERALL LENGTH7.481 INCHES MINIMUM AND 7.561 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
OVERALL WIDTH6.702 INCHES MINIMUM AND 6.782 INCHES MAXIMUM IN
SPECIAL FEATURESGASKET HAS 4 APERTURES WITH THE FOLLOWING DIAMETERS: MIN 0.480 IN. AND MAX 0.520 IN.; MIN 1.050 IN. AND MAX 1.074 IN.; MIN 1.238 IN. AND MAX 1.262 IN.; MIN 1.374 IN. AND MAX 1.376 IN. IN
OUTSIDE CORNER RADIUS0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
MATERIALALUMINUM ALLOY AND RUBBER OVERALL
SUBSTITUTES & CROSS-REFERENCES 7
688166-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
9643M84Reference document
Same NSN cross-reference
Reference document — Secondary reference
9643M84P01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
CA6256Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
DA5136Reference document
Same NSN cross-reference
Reference document — Secondary reference
9643M84P02Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9630M74P02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9630M74P02?
9630M74P02 is a GASKET.
What parts can replace 9630M74P02?
There are 7 known substitutes for 9630M74P02: 688166-1, 9643M84, 9643M84P01 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9630M74P02?
9630M74P02 is cataloged in the U.S. Government catalog under NSN 5330-00-110-6222. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9630M74P02