CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include body_width: 0.243 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN, body_height: 0.180 INCHES MAXIMUM IN, body_length: 0.750 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN, special_features: WEAPON SYSTEM ESSENTIAL; DESIGN ANALYSIS, features_provided: HERMETICALLY SEALED AND BURN IN AND W/RESISTOR AND W/STROBE AND W/ACTIVE PULL-UP, output_logic_form: TRANSISTOR-TRANSISTOR LOGIC. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-00-584-3996, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.243 INCHES MINIMUM AND 0.261 INCHES MAXIMUM IN |
| body_height | 0.180 INCHES MAXIMUM IN |
| body_length | 0.750 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN |
| special_features | WEAPON SYSTEM ESSENTIAL; DESIGN ANALYSIS |
| features_provided | HERMETICALLY SEALED AND BURN IN AND W/RESISTOR AND W/STROBE AND W/ACTIVE PULL-UP |
| output_logic_form | TRANSISTOR-TRANSISTOR LOGIC |
| inclosure_material | CERAMIC |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| test_data_document | 96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | DUAL 5 INPUT |
| inclosure_configuration | DUAL-IN-LINE |
| NSN | 5962-00-584-3996 |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -20.0 VOLTS MINIMUM POWER SOURCE AND 20.0 VOLTS MAXIMUM POWER SOURCE |
| END ITEM IDENTIFICATION | ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); COUNTERMEASURE SET AN/SLQ-32; TRAINER, B-1B AIRCRAFT; TEST STATION, OQ-290(V)MSM; MISSILE, TOMAHAWK; SUPPORT EQUIPMENT, B-1 AIRCRAFT; SUPPORT EQUIPMENT, B-52 AIRCRAFT; MISSILE, AIR-TO-AIR, PHOENIX (AIM-54); AIRCRAFT, ( AC-130H, MC-130H, EC-130E, H |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-2 MIL-M-38510 |
| MAXIMUM POWER DISSIPATION RATING | 400.0 MILLIWATTS |
| DESIGN FUNCTION AND QUANTITY | 2 RECEIVER, LINE DIFFERENTIAL |
| BODY WIDTH | 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS DEGC |
| INPUT CIRCUIT PATTERN | DUAL 5 INPUT |
| TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |