PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9608M20P24
9608M20P24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: INCLUDED, material: STEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, overall_length: 3.050 INCHES MINIMUM AND 3.070 INCHES MAXIMUM IN, special_features: ASBESTOS IMPREGNATED WITH POLYTETRAFLUOROETHYLENE AND REINFORCED WITH WIRE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-457-7194, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9608M20P24
NSN: 5340-00-457-7194
FSC: 5340
CAGE: 07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
cushionINCLUDED
materialSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
overall_length3.050 INCHES MINIMUM AND 3.070 INCHES MAXIMUM IN
special_featuresASBESTOS IMPREGNATED WITH POLYTETRAFLUOROETHYLENE AND REINFORCED WITH WIRE
style_designatorCURVED ARCH
material_thickness0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
mounting_hole_size0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
inside_diameter/arch_length1.564 INCHES MINIMUM AND 1.644 INCHES MAXIMUM IN
distance_between_mounting_hole_centers2.750 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch0.725 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
NSN5340-00-457-7194
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9608M20P24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHION: INCLUDED
•
MOUNTING PAD: NOT INCLUDED
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.725 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
•
INSIDE DIAMETER/ARCH LENGTH: 1.564 INCHES MINIMUM AND 1.644 INCHES MAXIMUM IN
•
MOUNTING HOLE SIZE: 0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
CUSHIONINCLUDED
SPECIAL FEATURESASBESTOS IMPREGNATED WITH POLYTETRAFLUOROETHYLENE AND REINFORCED WITH WIRE
MOUNTING PADNOT INCLUDED
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.725 INCHES MINIMUM AND 0.745 INCHES MAXIMUM IN
INSIDE DIAMETER/ARCH LENGTH1.564 INCHES MINIMUM AND 1.644 INCHES MAXIMUM IN
MOUNTING HOLE SIZE0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM IN
MATERIALSTEEL COMP 321 LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
MATERIAL THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
22564AInterchangeable
interchangeable cross-reference
interchangeable
851214Interchangeable
interchangeable cross-reference
interchangeable
06769ABInterchangeable
interchangeable cross-reference
interchangeable
R26265Interchangeable
interchangeable cross-reference
interchangeable
1-300-374-03Interchangeable
interchangeable cross-reference
interchangeable
1-300-374Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9608M20P24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9608M20P24?
9608M20P24 is a STRAP,RETAINING.
What parts can replace 9608M20P24?
There are 11 known substitutes for 9608M20P24: 22564A, 851214, 06769AB and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9608M20P24?
9608M20P24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-457-7194. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9608M20P24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026