PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 960548
960548 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include length: 36.0 MILLIMETERS NOMINAL MM, material: STEEL CORROSION RESISTING OVERALL, head_style: FILLISTER COUNTERSUNK, head_diameter: 6.0 MILLIMETERS NOMINAL MM, thread_direction: RIGHT-HAND, recessed_drive_style: SOCKET. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-770-2464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
960548
NSN: 5310-00-770-2464
FSC: 5310
CAGE: 93334 — ATWOOD FENCE CO INC (USA)
SPECIFICATIONS
length36.0 MILLIMETERS NOMINAL MM
materialSTEEL CORROSION RESISTING OVERALL
head_styleFILLISTER COUNTERSUNK
head_diameter6.0 MILLIMETERS NOMINAL MM
special_featuresCORTEX BONE SCREW; FINE FULLY THREADED; FOR ORTHOPEDIC PROCEDURES; PART OF SUPPORT KIT FOR SMALL FRAGMENT SET; NSN 6515-01-385-6088
thread_directionRIGHT-HAND
recessed_drive_styleSOCKET
outside_thread_diameter3.5 MILLIMETERS NOMINAL MM
part_name_assigned_by_controlling_agencySCREW BONE RIGHT HAND 3.5MM OD THREAD 6MM HEAD DIA 36MM LG MM
NSN5310-00-770-2464
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 960548 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: CELLULOSE OVERALL
•
THICKNESS: 0.125 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
HOLE DIAMETER: 0.193 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.500 INCHES NOMINAL IN
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCELLULOSE OVERALL
THICKNESS0.125 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
HOLE DIAMETER0.193 INCHES MINIMUM AND 0.198 INCHES MAXIMUM IN
OVERALL DIAMETER0.500 INCHES NOMINAL IN
CENTER HOLE SHAPE STYLEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
204.036Interchangeable
interchangeable cross-reference
interchangeable
96-0548Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 960548?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 960548?
960548 is a WASHER,FLAT.
What parts can replace 960548?
There are 2 known substitutes for 960548: 204.036, 96-0548. Substitute compatibility should be verified for your specific system.
What is the NSN for 960548?
960548 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-770-2464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 960548

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026