PartsTable
Technical Data Sheet
Download PDF

960445C1 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

960445C1: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY CASE, case_style: SQUARE, seal_width: 0.312 INCHES NOMINAL IN, surface_treatment: ANODIZE CASE, housing_bore_diameter: 1.438 INCHES NOMINAL IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-053-1938, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
960445C1
NSN: 5330-01-053-1938
NIINs: 010531938, 014405616
FSC: 5330 — Packing and Gasket Materials
CAGE: 55820 — RTX CORPORATION DIV PRATT & WHITNEY (USA)
SPECIFICATIONS
materialALUMINUM ALLOY CASE
case_styleSQUARE
seal_width0.312 INCHES NOMINAL IN
surface_treatmentANODIZE CASE
housing_bore_diameter1.438 INCHES NOMINAL IN
sealing_element_styleANGULAR
accommodated_shaft_diameter1.062 INCHES NOMINAL IN
NSN5330-01-053-1938
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 960445C1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 1.438 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 1.062 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE CASE
•
MATERIAL: ALUMINUM ALLOY CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.312 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER1.438 INCHES NOMINAL IN
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER1.062 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE CASE
MATERIALALUMINUM ALLOY CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 3
480210HGRReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
905531C1Reference document
Same NSN cross-reference
Reference document — Secondary reference
906445C1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 960445C1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 960445C1?
960445C1 is a SEAL,PLAIN ENCASED.
What parts can replace 960445C1?
There are 3 known substitutes for 960445C1: 480210HGR, 905531C1, 906445C1. Substitute compatibility should be verified for your specific system.
What is the NSN for 960445C1?
960445C1 is cataloged in the U.S. Government catalog under NSN 5330-01-053-1938. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 960445C1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.