PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 96008-31
96008-31 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 9.250 INCHES NOMINAL IN, aperture_diameter: 8.500 INCHES NOMINAL IN, bolt_circle_diameter: 8.875 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-106-4016, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96008-31
NSN: 5330-00-106-4016
FSC: 5330
CAGE: 15472 — SOLVENTUM PURIFICATION INC. DIV FILTRATION AND SEPARATION DIVISION (USA)
SPECIFICATIONS
hole_diameter0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter9.250 INCHES NOMINAL IN
aperture_diameter8.500 INCHES NOMINAL IN
bolt_circle_diameter8.875 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-00-106-4016
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 96008-31 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 8.875 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 9.250 INCHES NOMINAL IN
•
APERTURE DIAMETER: 8.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.468 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT CIRCLE DIAMETER8.875 INCHES NOMINAL IN
OUTSIDE DIAMETER9.250 INCHES NOMINAL IN
APERTURE DIAMETER8.500 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
8080Interchangeable
interchangeable cross-reference
interchangeable
MS36176-2Interchangeable
interchangeable cross-reference
interchangeable
17-1220-42Interchangeable
interchangeable cross-reference
interchangeable
290162PC7Interchangeable
interchangeable cross-reference
interchangeable
K8080Interchangeable
interchangeable cross-reference
interchangeable
MIL-W-583Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 96008-31?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96008-31?
96008-31 is a GASKET.
What parts can replace 96008-31?
There are 12 known substitutes for 96008-31: 8080, MS36176-2, 17-1220-42 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 96008-31?
96008-31 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-106-4016. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96008-31

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026