PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9600-8-051
9600-8-051 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, overall_width: 9.125 INCHES NOMINAL IN, overall_length: 9.625 INCHES NOMINAL IN, bolt_hole_quantity: 11, material_document_and_classification: VELLUMOID FSCM 01212 MFR REF ALL MATERIAL RESPONSES OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-029-8096, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9600-8-051
NSN: 5330-01-029-8096
FSC: 5330
CAGE: 20179 — KEPNER PLASTICS FABRICATORS, INC. (USA)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
overall_width9.125 INCHES NOMINAL IN
overall_length9.625 INCHES NOMINAL IN
bolt_hole_quantity11
material_document_and_classificationVELLUMOID FSCM 01212 MFR REF ALL MATERIAL RESPONSES OVERALL
NSN5330-01-029-8096
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9600-8-051 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PAPER AND GLUE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: VELLUMOID FSCM 01212 MFR REF ALL MATERIAL RESPONSES OVERALL
•
BOLT HOLE QUANTITY: 11
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPAPER AND GLUE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONVELLUMOID FSCM 01212 MFR REF ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH9.625 INCHES NOMINAL IN
BOLT HOLE QUANTITY11
OVERALL WIDTH9.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
IAT3076DSInterchangeable
interchangeable cross-reference
interchangeable
118720Interchangeable
interchangeable cross-reference
interchangeable
021780Interchangeable
interchangeable cross-reference
interchangeable
23818Interchangeable
interchangeable cross-reference
interchangeable
89SP1117Interchangeable
interchangeable cross-reference
interchangeable
FS-200M-SBInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9600-8-051?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9600-8-051?
9600-8-051 is a GASKET.
What parts can replace 9600-8-051?
There are 7 known substitutes for 9600-8-051: IAT3076DS, 118720, 021780 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9600-8-051?
9600-8-051 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-029-8096. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9600-8-051

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026