PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 96-81006
96-81006 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1045 OR STEEL COMP 1141 OVERALL, thickness: 0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN, hole_diameter: 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN, heat_treatment: QUENCHED AND TEMPERED, hardness_rating: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM, overall_diameter: 1.037 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-109-6757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
96-81006
NSN: 5310-01-109-6757
FSC: 5310
CAGE: 10988 — CNH INDUSTRIAL AMERICA LLC DBA CNH AMERICA (USA)
SPECIFICATIONS
materialSTEEL COMP 1045 OR STEEL COMP 1141 OVERALL
thickness0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
hole_diameter0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
heat_treatmentQUENCHED AND TEMPERED
hardness_rating38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
overall_diameter1.037 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5310-01-109-6757
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 96-81006 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAT TREATMENT: QUENCHED AND TEMPERED
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: STEEL COMP 1045 OR STEEL COMP 1141 OVERALL
•
THICKNESS: 0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
HEAT TREATMENTQUENCHED AND TEMPERED
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD ALL MATERIAL RESPONSES OVERALL
MATERIALSTEEL COMP 1045 OR STEEL COMP 1141 OVERALL
THICKNESS0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.630 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER1.037 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
19620Interchangeable
interchangeable cross-reference
interchangeable
M3894Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 96-81006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 96-81006?
96-81006 is a WASHER,FLAT.
What parts can replace 96-81006?
There are 2 known substitutes for 96-81006: 19620, M3894. Substitute compatibility should be verified for your specific system.
What is the NSN for 96-81006?
96-81006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-109-6757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 96-81006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026